Start with the opening, then compare the frame, glass, hardware, performance route and published size. Use the project scenes for orientation and the full catalogue for technical checking.
A room against the house. Roof, walls, ventilation, shading and drainage are quoted together.
Sunroom
Glass roof, glass walls, ventilation, shading and drainage. Aluminium outside, wood inside. The room is quoted as depth, width and height. Foundations, floor and installation stay local.
Look
A room against the house. Glass roof, glass walls. Aluminium outside, wood inside. A courtyard dining room, a guesthouse, or a room added to a house.
Opening
The side window is FZ75. A garden door within 2000 mm wide is F130T. Wider is F150TS. Sizes are in the table.
Insulation
The room is not given one Uw. Each opening uses the band of its own series.
Hardware
The window uses concealed hinges. The door uses CMECH. The wider door uses an SUS304 track. Shading and drainage are written on this room’s quote.
Limit
The room is quoted as depth, width and height. Foundations, the floor and installation stay local.
The room has no series code of its own. Send the plan.
Against the house. Glass roof, glass walls. Aluminium outside, wood inside.
The shape is fixed by this room. Send the depth, the width and the height. Add the garden door width if you know it. We draw from these figures and mark anything that does not fit. Foundations, the floor and installation stay local.
Depth, width and height are needed before a drawing.
Choose the system. Send the drawing. Get the plant quote.
The shop is a decision guide, not a checkout cart. Use it to name the likely opening or system, then send the drawing, schedule, quantity and destination so the plant can confirm glass, hardware, packing, freight and local scope.
01Open one series
Start from windows, lift-and-slide, doors or the stick wall.
02Send drawings or an opening schedule
Rough sizes, quantities, country and site photos are enough for the first review.
03Receive a plant route
We confirm the system, glass makeup, ex-works price, export packing and freight basis.
04Lock the delivery boundary
Local install, permits, foundations and final compliance are written clearly before order.
On the coast and on islands: pressure-equalised drainage in the frame, hardware chosen for the salt-spray grade, and triple glazing written to the performance on the quote.
08
Small works
These are not new series. The drawing shows where each one sits. The size is written on the quote.
Shade blades
Above the window. The window series stays the one on the drawing.
Canopy
Above the door. A hinged door within 1000 mm wide stays HY80.
Glass roof
The vertical bays can be MQ65. The roof is another line on the quote.
Light over the door
The fixed light is part of this door. It is not a second series.
Fins and a screen
The panel series is the skin and the edge. Fins and the screen are written on the quote.
Technical product desk
Read the system before you ask for a price.
The product code is only the start. The quote has to carry the profile depth, thermal break, glass, hardware, opening size, performance route, finish, drainage and what happens on site. Use this guide with the catalogue below.
01
System build-up
Frame depth is not the whole system. Check the thermal break, profile wall, sash or leaf weight, glass pocket and the opening direction together.
Frame / mullion and transom
Thermal break and glass pocket
Sash, leaf or bay limit
02
Performance route
Uw is a project result, not a promise attached to the frame alone. Glass, spacer, size, hardware and destination standard change the answer.
Uw or project-dependent thermal value
Air / water / wind / acoustic route
NFRC, CSA, NAFS, AS2047 or CE route
03
Glass and hardware
The same series can quote differently when the glass make-up, track, lock, screen, handle or corrosion grade changes.
Glass thickness and make-up
Hardware brand and load
Screen, hidden track and drainage options
04
Delivery boundary
The factory scope and local scope are written separately, so the drawing, packing, freight, installation and permits do not blur together.
Factory drawing and approval route
Export packing and delivery basis
Local opening, fixing and installation
What the table tells you
A product row has ten decisions inside it.
Use the row to make a first selection. Use the drawing and destination market to confirm the final specification.
Frame
Profile depth, wall and thermal break.
Uw
Whole-window thermal value where available.
A / W / W / AC
Air, water, wind and acoustic performance route.
Hardware
Brand, lock, track, hinge and corrosion choice.
Built
Manufacturing size band for the opening.
Sash
Sash or leaf load limit; a dash means confirm by project.
The stair is not a stock SKU. Send the floor plan, rise and going, photos and finish direction; we coordinate a made-to-measure system, drawings, parts and export packing.
The aluminium in this photograph is the sliding door. The side walls are timber. There is no second window. A door-height slider within 2000 mm wide is the F130T door. Wider than that, F150TS.
The garden face is a two-leaf slider. Wider than 2000 mm, it is F150TS. Within 2000 mm, it is the F130T door. The punched window in the dark side wall is an inward tilt-and-turn, FZ75, one sash within 900 mm.
ABRear extension on a brick house. A slider, and one side window.
What repeats is the glass wall, not a bespoke window per key. The grid is MQ65, span at most 1500 mm. The leaf that opens onto the terrace is F150TS. Quantity is the number of keys.
ABOne villa type along the path, and the glass pavilion.
The aluminium in this photograph is the lift-and-slide wall. One unit within 2500 mm wide is F150TS. If the run is longer, the quantity is the number of units.
The two-storey glass corner is MQ65, span at most 1500 mm. If the hall roller doors are part of your package, note them separately and we will confirm the route.
Each bay is taller than a casement sash, so it is MQ65, span at most 1500 mm. Quantity is the number of bays. If the service door is needed, mention it in the notes.
What repeats is the shopfront, not a different window per shop. The grid is MQ65, span at most 1500 mm. The leaf that opens is an HY80 door, within 1000 mm wide. The roof lantern is the same MQ65 grid if each pane stays within 1500 mm.
What repeats is one apartment, not a different window on every floor. The balcony door within 2000 mm wide is the F130T door; wider, F150TS. The floor-to-ceiling grid around it is MQ65, span at most 1500 mm. Quantity is the number of homes.
Each guest-room light is an H98S sash, 450–900 mm wide. Quantity is the number of sashes. The entrance doors are HY80, within 1000 mm wide. If the canopy is required, flag it as a separate item.
ABHotel front. Repeating room windows, and the entrance.
The run is bifold, D70. Each leaf is 700–800 mm wide and 2200–3200 mm high. Quantity is the number of leaves. Leaf weight is confirmed during quote review.
Both are MQ65, span at most 1500 mm. One row is a bay on the long elevation; quantity is the number of bays. The other is the glass box at the entrance.
A bay that opens is F150TS, within 2500 mm wide. A fixed bay in the same wall is MQ65, span at most 1500 mm. Quantity is the number of bays around the court.
The image in each row shows the available section or product reference. Open it to check the profile relationship before sending your drawing.
The first four groups are the series above: windows, lift-and-slide, doors, stick wall. The rows after those are the other codes. Compare frame depth, opening, hardware and size here. Glass and certificates are confirmed on the drawing.
Additional export families are shown as product references where a local section drawing is not yet available. The final section, glass, hardware and compliance route are confirmed from your drawing.